Precautions for production of autoclaved lime-sand brick production line:
The autoclaved lime-sand brick production line has been proved by many sufficient tests that the autoclaved lime-sand brick can be used for load-bearing walls. This product uses a large amount of fly ash as one of the main raw materials, and the price of fly ash is very low. The production process is very simple, and the specifications are the same as those of red bricks, which is convenient for construction.
The wet fly ash used in the autoclaved lime-sand brick production line should not be too large, and the dry fly ash can be directly put into the silo. The lime should be broken stones, and the particles should be fine, which may be similar to pulverized coal. The ash reacts quickly, and it should not be too fine. The lime should be protected from moisture. Water slag and coal cinder should be used as fine aggregates, and clay and sundries should be avoided as much as possible.
Autoclaved lime-sand brick production line Autoclaved lime-sand bricks are mainly autoclaved curing. Before the bricks enter the autoclave, they must be placed for a period of time in order to increase the strength of the bricks. , It is not easy to have cracks, the quality of bricks depends on the level of steam curing temperature, the length of curing time, improper temperature rise and fall during curing, bricks are easy to crack.
Autoclaved lime-sand bricks can be completely used in industrial and civil buildings, and have broad prospects in the construction market. Under the premise of long-term alternation of cold and heat, autoclaved lime-sand bricks have to be used.
The raw materials of autoclaved lime-sand bricks are a new type of wall material produced by an autoclaved lime-sand brick production line process according to a scientific formula and a certain proportion.
