Welcome to Haomei Machinery Equipment Co., Ltd.!
Block Making Machine

Six Tips For Using Brick Making Machine

1. When the motor of the wholesale fly ash brick making machine is running, it will cause the motor to burn, because the equipment of the total pressure regulating valve is too large. The total pressure regulating valve should be adjusted slightly until the motor works normally. Realizing timely adjustment and inspection is the operation of the machine. Power line hollow brick machine equipment has 25 mm or more than 16 mm of copper wire with aluminum exceeding 2 in the power system. The input voltage of the equipment is operating normally: high voltage 380v-410v, low voltage 330v-360v, the machine must have a reliable grounded non-fired brick.

2. When there is no vibrator, there will be a long or loose brick, and it will start under the pressure caused by the excessive pressure. To suppress the vibration, the pressure should be adjusted accordingly to support the oil tube under the cylinder. Welding or damage to the mold, the balance arm and the main part are the reasons for the small pressure adjustment. The pressure will die, because the pressure will lock up, causing the impact force of the mold and the vibration table to be too large, which affects the entire equipment parts The pressure of the pressure valve is gradually reversed, and the mechanical vibration force is stable.

wholesale fly ash brick making machine

3. When the surface of the brick is loose, the brick body is broken, or the mold and lower mold of the wholesale fly ash brick making machine are removed because the indenter is too small: the brick positioning cannot cause the brick to be loose.

4. If the pressure regulating valve fails because the pressure spring of the pressure regulating valve is damaged, the same type of pressure spring should be replaced.

5. If there is oil leakage, the reason is that the sealing effect of the cylinder head is not good, and the corresponding type of seals should be replaced in time.

6. The fly ash brick making machine equipment should be carefully read the product manual, so that each operator should be fully trained before production until the assessment is qualified.



Prev: How To Replace Abrasive Tools For Block Machine

Next: Brick Machine Precautions In Summer

Related Products

  • Contact Us
  • Tel:86-371-65627332
  • Phone:86-371-65627332
  • Email:[email protected]
  • Office Add:CBD, Zhengzhou, China
Copyright © 2024 By Haomei Machinery Equipment Co., Ltd.. All Rights Reserved